Quick Jump Daily Digest
Thank you for your interest in the Quick Jump Daily Digest. Get notified of all new content on QJ in our free Daily Digest. To subscribe, enter your email address below and click the subscribe button.
TOTALNewbi easyInstaller for Pandora |
Listed in: Homebrew Applications Tags: Custom Firmware, Dark AleX, Hellcat, psp homebrews, Sony
Ó
Homebrew developer Xi-Bit brought forth another version of Pandora easy installer, this time one that runs via batch type procedures entirely through the command shell. Called TOTALNewbi easyInstaller, the project was a collaboration job between Xi-Bit and a pal of the developer. The wizard-like installer comes at a hefty 135 MB+ download, but serves as a great addition to your easy installer software options.
TOTALNewbi comes packed with install options, too, so it sort of justifies the longer download wait. It offers a four-way installer choice for installing Pandora on the original Sony PlayStation Portable, HellCat's Extended Menu, 3.60 baseline firmware for the PSP Slim & Lite, and M33's (Dark AleX) 3.71 custom firmware with the Universal Unbricker.
The archive doesn't come bundled with even a basic readme, but given the care put into the step-by-step procedure, we doubt you could go wrong with the application - unless you decide to do anything else than what the program specifies. As usual, the original PSP battery is required for the Pandora side, and the file best for executing once the archive has extracted is the START app.
Thanks again to Xi-Bit for his constant tipping.
Download: TOTALNewbi easyInstaller
| 0% of voters think this story ROCKS! |
|
|
Comments
Reply
Reply
XI-BIT THE NEW PSP thing :)
Thanks!!!!
Reply
Reply
Reply
They do not have to run any of the other files.
But we are working on an upgrade that fixes that problem! - if it even exists?
Reply
Reply
It's illegal.
Reply
Just created a MS with this tool (Pandora Battery also created). Yes, I'm a NOOB but the tool was clear for me.
Ok, what now? On my own psp (3.71M33-2) it's working fine. Added the MS and battery and choosen for Option 4 and my PSP running now 3.71M33...So indeed working.
But work's this also on a new non downgraded PSP Fat and PSP slim?
Reply
Reply
Reply
Thanks for your QuickRespons...
Geez,
Vipyammer
Reply
Reply
But have a new version ready, but QJ don't seems to care at all...
Reply
h""p://www.megaupload.com/?d+M172XSWM
Reply
and then switch to the PSP Slim?
Using this app on the PSP Slim
I get through with the format process and
it asks me to eject the MS and then USB,
reinsert MS and USB and then it wants to
format again. After doing so I get this
message.
PSP MS IPL Installer
Load IPL code f:msipl.bin
Can't open f:msipl.bin
Press any key to continue . . .
From here the dos window just shuts down
and my MS left blank needing to be formated.
Whats up with this app?
No details as how to use it and I started by
using the START.exe. so it's not as if I was
a serious noob about it.
Plus the new version at
http://www.megaupload.com/?d+M172XSWM
is no longer at that address so you'll need to
create a new upload.
Reply
Reply
new version
h""p://www.megaupload.com/?d+M172XSWM
Please...Also waiting for the correct download link...May people love's your tool so give them all a big smile...
Reply
Reply
Reply
you guys....just replace the "" with tt . anyone should know that...almost every website starts with http://
http://www.megaupload.com/?d+M172XSWM
^^ here...for the copy paste whores
Reply
Universal Unbricker (Universal Unbricker for FAT and SLIM) It's also an 3.71 M33 CFW installer!
Everything seems to extract fine but just after that I reach this screen:
PSP MS IPL Installer
Load IPL code l:/msipl.bin
241664 bytes(59 block) readed
Target DRIVE is 3
Check partation Sector
boot status 0x80
start head 0x3B
start sec/cyl 0x0012
partation type 0x06
last head 0x3F
last sec/cyl 0xB8E0
abs sector 0x00000771
ttl sector 0x001DC08F
signature 0xAA55
Check BPB Sector
signature AA55
Check free reserved sector:OK
Write ABS Sector 0x10 to 0x1E7
Are You Sure ?[Y]
Where I hit Y and receive:
PSP MS IPL Installer
Load IPL code l:/msipl.bin
241664 bytes(59 block) readed
Target DRIVE is 3
Check partation Sector
boot status 0x80
start head 0x3B
start sec/cyl 0x0012
partation type 0x06
last head 0x3F
last sec/cyl 0xB8E0
abs sector 0x00000771
ttl sector 0x001DC08F
signature 0xAA55
Check BPB Sector
signature AA55
Check free reserved sector:OK
Write ABS Sector 0x10 to 0x1E7
Are You Sure ?[Y]y
Write MS BOOT CODE
Press any key to continue . . .
Followed by the usual page when it doesn't seem to work:
This easy installer was mabe by HC and Xi-Bit
All files completed by Xi-Bit
Icon made by CraQkeY
Rest made by Noobz Team, Team C+D, Dark_AleX og HellCat!
Thanks to every one!
Press any key to continue . . .
Does anyone know what I am doing wrong, I am somewhat of a noob to PSPs, this is why I have provided all the info above.
Note. I have a new PSP Slim running Firmware 3.60 - only ran it for a few days before trying to downgrade/unbrick it. No other updates installed.
Cheers in advance.
Simple_Noob
Reply
Reply
For us the dutch people on www.pspnieuws.nl we just provided a full proof dutch guide for this one. Great...
Thanks to the developers of publishing this NoobProofTool
Reply
Copy "msipl.bin" into the folder called "msinst" that was extracted from the ZIP file.
In the Command Prompt, switch into the "msinst" folder... wherever you put it.
Type "msinst X msipl.bin" where X is the drive of your PSP. Do not include the colon. For example, my PSP is connected at O:, so I type "msinst O msipl.bin".
Reply