Dark_AleX's SE-C Custom Firmware released! |
Ó
Just a few short minutes after releasing HEN D, Dark_AleX has just released 2.71 SE-C Custom Firmware, the update to the new golden firmware.And while the changelog is small to say the least, the great thing is that the newly released SDK along with it will make sure that all the new updates will actually be rolled out in the form of modules.
Changes:
- The ability to load modules from the memory stick
- Extract seupdmaker, seupdmaker%, 271seflasher and 271seflasher% from the NEWINSTALL folder into your GAME150 Folder (GAME folder on 1.50 or if you've changed it from the Recovery menu in 2.71 SE)
- Download the 1.50 and 2.71 Firmware updates.
- Rename the update PBP files to 150.PBP and 271.PBP
- Move them to the seupdmaker folder.
- After that, run the Update Maker application from the GAME menu. Once it's done making the DXAR file, move the newly generated DXAR file to the 271seflasher folder.
- Run 271 SE Flasher from the GAME menu to install 2.71 SE-C.
- Once installed, you can delete all the four folders.
Note: Before installation, you should probably check if the generated DXAR file is the correct size and clean. You can do that by downloading any app which generates a MD5 checksum and comparing it with the one given below.
SHA1 of DXAR: A283CFC4EFA274A1A41C7A11E7EFF8FE1A59473A
MD5 of DXAR: E51EFACDAAF088F0308857FFDA6C18FA
Download: [2.71 SE-C Custom Firmware]
Download: [SDK for HEN-D and SE-C] (Only for devs)
Discuss: [Forum release thread]
46 Jumps PSP homebrew - PSP live TV v0.3
39 Jumps PSP homebrew - PSP Live TV v0.4
19 Jumps PSP homebrew - QMixer v1.0
17 Jumps Buy two, get one free at Best Buy
13 Jumps Atlus now mass-recruiting debuggers
Contact Us:
The QJ.net Network |
 |
| Site | Feed |
| QJ.NET | RSS |
| Nintendo DS | RSS |
| PlayStation 3 | RSS |
| PSP Updates | RSS |
| Wii | RSS |
| Xbox 360 | RSS |
| MMORPG | RSS |
| Personal Computer Games | RSS |
| iPhone - iPod Touch | RSS |
| QJ.NET Forums | RSS |
Add QJ.NET
User Favorites - December
User Favorites - December
Categories
Archives
Accessories
Add-ons
Applications
Artwork
Batteries
Cheats
Deals
Emulators
Events
Featured Articles
Firmware
Flash Applications
Flash games
Game Demos
Games
Hacks & Exploits
Homebrew Applications
Homebrew Demos
Homebrew Development
Homebrew Emulators
Homebrew Games
Homebrew Themes
How-To
Humor
Imports
Interviews
Magazines
Mods
MY QJ
News
Off Topic
On Shelves This Week
Opinions & Analysis
Podcasts
Previews
PSP Go
PSP Minis
PSP Slim & Lite
QJ How-To Series
QuickJump QuickGuide
QuickJump QuickPeek
Reviews
Rumors
Scans
Screenshots
Site News
Titles
UMD Movies
Videos
Weekend Warrior
Wi-Fi
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
Comments [refresh]
amazing
robert for the oratory is a homosexuel
keep up the good work alex
Dark alex thanks for this release
does this fix the kernal access problem that halted valykre profile to play?
HELL YEAHHHHHHHHHHHH HHHHHHHH!!!!!!! !!!!!!!!!!!!
NOT WORTHY
NOT WORTHY
how do u upgrade from 2.71 SE-B to 2.71 SE-C
*****
nice thx dark alex
can u do this with a version 2.71 psp
can you upgrade to 2.71 SE-C from 2.71 SE-B? if so how?
Should i downgrade? Decisions, decisions!
I hope this and HEN D recieve many more updates
DERK ALEX EES SOOPAH SEXY!
is the only change :The ability to load modules from the memory stick.
What about loading isos on the xmb that are using usbhost?
and the built in overclocker?
I have an other question , what does this mean for me? that im able to load modules from the memorystick.I have no idea what it does.Seeing as it isn't an update and a lot more troublesome to install , why shouldnt I just keep using my 2.71 SE-B?
*****ing awesome!
read the damn readme then you will know how to update !!!!!!!!
ok how do u upgrade with 2.71 psp that has no homebrew installed just plain 2.71 firmware
its not opening the 150.PBP file...
AMAZING I LOVE U DARK_ALEX
UR MY IDOL!!!
lol but really this is amazing...thanks
"* Fixed a bug in the loading of big user prx's, that affected a plain prx of socom2 umd, and some homebrew prx's." - Not to sound like a dumbass but does this have anything to do w/ playing online?
cheers for the update alex but there is one small thing i'd like to say that this will probably only be useful for developer,as you can already install modules which are packaged as eboots.... i.e. the mp3 module which is great,but nonetheless alex will soon be challenging sony for update speed lol...and i bet he has better consumer service!
From The Readme:
If you are in a previous version of SE, simply copy the seupdmake, seupdmaker%, 271seflasher and 271seflasher% folders to
/PSP/GAME150 and follow the same instructions than when installing from 1.50.
Do you think that if i upgrade the frogram called 2.71 SE customizer will work on se-c? cuz i want to upgrade but if i do i will have to flash my psp gameboot and background again. SO im just wondering if this program is safe using se-c...Thanks
why cant we use the data.dxar that we used to install SE-A, or SE-B? aren't they they same file?
There is no different between 2.71SE-B'' and SE-C. :( I'm very disappoint.
But anyway thank you Alex! You are the BEST!
no there not the same file
DOESNT WORK WITH SE-C!!!!!
A small fix will do.
if it can load modules from the ms then... vcscheatdevice without flashing.
after upgrading i can't play pspradio or psp revolution... looks like they start to run, but just dies with the logo on the screen
if the same program uses the same 1.50 and 2.71 updates and form the same file... why are they any different?
i can run valkyrie profile with SE-B". just run devhook,change the clock speed to 222,choose valkyrie to run as umd and it works.
Do u think its safe for me to upgarde because i have a flashed gameboot and a flashed background...did anyone do it like that???
huh?? i just read this and go and test psp revolution and it works...maybe you have another problem.
I think I'll pass on this one as I don't use any supplementary modules. I was hoping for the built in speed selector but I guess we will have to wait for SED :)
Anyway kudos to Dark_Alex
I just upgraded from SE-B'' and now i can't see my (legally backed up) ISOs in the XMB. Also, are the GAME150 and GAME271 Folders of any use any more, the items in GAME271 aren't showing up anymore, i'm not sure about the GAME150 Folder, i don't have any Hombrew in that folder, i had SE-B'' set so the GAME folder is 1.50 kernel. I think i will go back to SE-B''. Good Work Anyway Dark_Alex
Er... now you can load modules with overclocking featers.
I am working on an auto-install for this. That way noobs can just run the update on their PSP's without all the complicated steps. It makes the DXAR file from the eboots, and then puts it all in the right place on the PSP. I'll post it when it is done, and out of testing which is predicted to be about 8:30 tonight.
You are a d.i.c.k. learn how to spell its "homosexual" not "homosexuel"
if i dont have any homebrew installed on my psp, can i install this, i just got my psp friday and i got it with version 2.60, i upddated to 2.71 cause i read u could have homebrew on 2.71, so can i install this or do i have to downgrade to 1.50 and do incremental updates
how do u use the seplugins? i did exactly what the read me said and its not working
yea im just gay
i dont think is supposed to say GAME271...it should have Game folder and GAME150....
disney reformat ur memory stick because i installed se-c and my iso's show just fine
nethawk u have to have a ta-082 motherboard to use Dark Alex's custom frimware
just make sure u dont hve a TA-082 motherboard
can some1 confirm that the costumiser and the overclocker work on this version, cuz i don't wanna loose those things
still not enough to make me upgrade from 1.5
you renamed it "150.PBP" its supposed to be "150"
its not the same file or else he wouldnt hav made us do it over
you make a folder called seplugins on the root of you memory stick. then you place the prx in there. then create either a game.txt for ingame prx's like cwcheat or make a vsh.txt for xmb prx's. Inside the game/vsh.txt you ms0:/seplugins/xxx.prx. I can't quite get it to work, but it can recognize it.
Hello gay person who tried to post as me.. don't know what else to do. i didn't have a previous SE installed, just followed these instructions here to install. Looks like everything went fine. I don't see anything in the README about if I have to create folders for 1.5 homebrew or something. Is that something you have to do? I didn't see anything about that anywhere. The PSP logo comes up, and then the light flashes as if it's reading the memory stick, and just stops there.
do you want, for it to make you a cake! i say this is amazing
SO DID anyone upgrade with a flashed psp???!?!??!?!??!
No, they aren't.
nethawk u need a NONE - TA-082, helper my ass, gonna make the guy brick his *****.
your QJ.NET Staff too
and the ms plugin loading doesnt seem 2 work! WTF!
duh... its supposed to be "150.PBP" if it can't open it then make sure you put it in the seupdatemaker folder(make sure it dont have the "%" at the end)
Hey helper, formatting my mem stick didn't work, so i went throught all of the steps again to reinstall SE-C, and i was a little hasty before and just used that DATA.DXAR that i had backed up from installing SE-A, and on top of that, i didn't check the MD5. I now just made a DATA.DXAR using the new update maker, and it worked.
Word from the wise, make a new DATA.DXAR
k just do everything the readme tells u but dont add the .txt at the end oof game and vsh because it automattically added when u make the text document
I can't get DevHook to work. When I click start, the screens goes black and shuts off.
It was working fine on SE-B.
PS: I did put the devhook flash fix that SE-C comes with.
why does he make the text red it scares the s**t out of me! make it white!
ok, thanks to all you helpful people, i figured it out. just had to put my 1.5 homebrew in to a GAME150 directory in PSP. Working fine now. This is nice. Thank you alex.
if you need help feel free to ask me ill be hear for a while...
How long does it normally take to extract and pack the 2.71 firmware? my psp is ratteling for 10 minutes now and i don't see any changes (unless a flickering memory stick light)...
leave it its still extracting if the light is flickering
are u installing se-c? or making the data.dxar file? and if ur installing by anymeans dont turn your psp off it will do it itself its gonna say "Done. Rebooting....."
i made a mistake you need a none ta-082 motherboard psp... wow joe you dont have to spaz out...
How do I uninstall Se-B" and what does loading modules mean? Please explain.
Could'nt we load modules that had overclocking features on SE-B''? Thanks Dark Alex, your the man.
Yea you have to flash-back to 1.5 using the recovery. THen use the Flasher to 2.71 SE-c!
Hey, I needa someone to send me a copy of the DXAR file that is used to install SE-C i need it to base the code of the Auto-Install Program on. I'll give you partial credit for the program. Send it to: Brendan09@gmail .com
I currently have 2.71 SE-B installed and before upgrading, I want to know wuts so new about this??? I don't get the part about "loading modules from memory stick." Why is that really important since I can run all 1.5 homebrew on SE-B like DJEN, SNES and PSPRADIO. It'll be great if someone can explain wuts so great about this firmware?
stick your weener in my butt
100% working awsome firmware Greak Job Dark_Alex
how long dus it take to make it?
my ms keeps on flickering.....
i would love for dark alex to hover his butt over my face, spread his cheaks with his hands, and grunt out a nice fat fudge dragon for all the world to see =D i would also love for booster to urinate on my fanny while i make ooey so it breaks up easier cus my ooeys have been dry and painful lately =/
Allow him, he's Mexican
no! you're all *****ing idiots. if it's already a PBP file and you rename it 150.PBP it will essentially become 150.PBP.PBP
you're cool
I can see the PRX and enable it in the RECOVERY menu...but its having no affect ingame, am using an MP3 prx plugin for listening to my tunes from the MUSIC folder when playing a game...wtf is wrong....
i think you meant, ur gay buttbutter
ms0:
seplugins:
game.txt(ms0:/seplugins/yourplugin.prx)
just follow the instructions on the main page. hell I followed it and done it from rev b just have faith. thanks alex you are the dogs bollocks with PSP
*****ing hell learn to spell you *****ing ***** sucking *****got
"
Er... now you can load modules with overclocking featers."
rot in hell you *****ing jew FEATURES, how *****ing hard is it, if you went to *****ing school you might be able to understand what these people are on about, but no, you *****ing ***** your *****ing mother instead and end up as a *****ing *****ing ***** jew ***** who cant do ***** but cry on some internet blod about how ***** their *****ing mother is at giving blow jobs to *****ing *****ing crack heads you useless *****ing jew so ***** off and rot in hell and *****ing learn to spell you *****ing *****sucking ***** who *****s their *****ing mother for free ***** OFF JEW ***** COON WOG AND ROT IN HELL
HAHAHAHAHAHAHAH AHAHAHAHAHAHAHA H AHAAHAHHAHAHAAHAHAHHAAHAHAHAH HA
im trying to install the both of the cheatdevice prx's, but just like alot of people with other plugins, it doesn't seem to be working. I hope we can have this issue sorted soon.
fu3king hell learn to spell you fu3king co3k sucking fajgot
"
Er... now you can load modules with overclocking featers."
rot in hell you *****ing jew FEATURES, how fu3king hard is it, if you went to c3nting school you might be able to understand what these people are on about, but no, you fu3king ***** your fu3king mother instead and end up as a fu3king fu3king ***** j3w *****er who cant do sh1t but cry on some internet blog about how sh1t their fu3king mother is at giving bl0w jobs to fu3king c3nting crack heads you useless fu3king j3w so fu3k off and rot in hell and fu3king learn to spell you fu3king co3k su3king tw2t who fu3ks their fu3king mother for free FU3K OFF J3W *****ER C00N W0G AND ROT IN HELL
HAHAHAHAHAHAHAH AHAHAHAHAHAHAHA H AHAAHAHHAHAHAAHAHAHHAAHAHAHAH HA
If u have the folder "GAME" set up for 1.50 kernel, the folder "GAME271" will work as your 2.71 kernel game folder. Anyways, i got it working now
wat do u write ingame.txt and vsh.txt to load modules and crap?
yes i did worked
no DAX support? sorry im not gonna do this :S
I created the Data.dxar file, and updated from SE-B" to SE-C. There is no need to downgrade to 1.5 to get to SE-C. If you had read the Readme.txt, you would have known this.
weird, I'm getting the from checksums, I did for SEB too, but I found the file elsewhere. I guess it might have something to do with that I'm running via nethost (only 32mb ms)
ok wat modules can u use for this that arent for vcs or lcs??? if u do send em to me at h7m5e1f
i hate waiting so this is awesome. funny how u halft recover just to update but i aint complaining thanks dark_alex ill be playin wiht this when i recharge my psp
opps, I meant wrong checksums
Can be answered from reading the readme carefully.
What is the point of Dark Alex spending any time creating a Readme if the majority of people
1) Do not bother to read it or
2) Do not read it properly and
3) Ask questions that are already clearly answered in the Readme.
I have not seen one question so far that has been asked that cannot be answered by doing a bit of reading.
during the installaiton from 1.5 to se-c, the program will format the flash0 (to make a clean installation) b4 dumping the files into it.
yup.
any auto_installer yet!
I can't wait to see what the development community comes up with, the prospect of additional mudules SEPARATE from the firmware
I had just finished installing SE-C and for "just in case purposes" I went to system information in the XMB and under system software it says "2.71 SE-B" and this makes absolutely no sense considering I had 2.71 SE-B'' just before flashing. :/ Anybody Else Have This?
wtf does it do -___-
If you are in a previous version of SE,
But which file?
DATA.DXAR ?
271.PBP and 150.PBP ?
you did it wrong then because mine says 2.71 SE-C
I had to run the flash installer twice, the first time it seems ot only prepare something, reboot on its own and then just sit at the SE-B'' XMB, I ran it again and this time the version was SE-C
ok so if i have version 2.71 psp i can just run that update or do i have to downgrade to 1.50 first
so what does this do that se-b2 didn't do? and what does "The ability to load modules from the memory stick" mean?
I just got home,first thing i usualy do is check QJ for any update..anyway thankX DarX_A
Just updated to se c thanx dark alex you rule also could someone tell me if its safe to flash cwcheat v0.1.6 rev b and mp3 module v0.3b now im using se c. Thanx
OR maybe you need to go suck off your mom and burn in hell!
Stupid fuccking queers like you make me sick.
what does this do that se-b2 didnt do? what does "The ability to load modules from the memory stick" mean?
if you're gay and have default windows setup, yeah it would be .pbp.pbp. but if you disable the hide extentions for known file types in the folder options menu, it will show the extention. way to fail script kiddies.
Uh, why not just load the DAX/CSO module from the memstick? Problem solved.
in the recovery menu configuration there's a game folder homebrew: (currently: 2.71 kernel) option, change that to 1.50 kernel and it will load them from the game folder. you can also hide corrupt icons here, since there's no reason not to.
how do i play homebrew on this se-c it dosnt allow me
Would you rather eat a big juicy dripping ***** you *****ing *****?
Thanks Pranav for including the instructions in your article above. Since I had only used auto-installers for SE, the readme wasn't very helpful to me.
..OH, of course, thanks to Dark Alex too! Woohoo, no-UMD needed to load UMD backups!
What umd games are you able to play on SE-C?
What umd games are you able to play on SE-C? Like Does Luminus 2, Yu-Gi-OH, Vice City and Sonic Rivals work?
they already work in 2.71SE-B''
Extract seupdmaker, seupdmaker%, 271seflasher and 271seflasher% from the NEWINSTALL folder into your GAME150 Folder (GAME folder on 1.50 or if you've changed it from the Recovery menu in 2.71 SE)
it says copy those folders, but i cant find the "seupdmaker, seupdmaker%" folders. Where are they? pls help me out!
So, how EXACTLY DO you install SE-C from SE-B"?
Specific instructions, please. Thank you.
it f_ucking tells you how to insatll it nelow the main article....god dammit
Installed as needed etc
but when i go to load mem stick
psp locks sort of and shuts down never loads the stick
have game dir emtpy
no matter what i try to load in gam150 or gam271
it locks
if anyone knows what in doign wrong or where to piont
a new guy I guess to this subject let me know
make sure u make 'ISO' folder in memory stick root
make sure u make 'GAME150' in PSP folder
make sure u make 'GAVE271' in PSP folder
---------------------------------------------------------------
create a game folder too
thanks Ill make a iso folder
had game gam150 and gam271
but no iso thanks agian !!!!
not worth the time to install should have waited for more to release but i guess good job....not
^^ I AGREE^^
any one confirm GTA VCS on UMD! working?
And Does more homebrew work well? gpsp wouldnt work well for me on SE-B"
and does the special SE version of IR shell work on it, as i curently have it set up 2 load at cold boot as its such a amazing homebrew
does this work on a ta-082 2.71 psp
I'm pretty sure you can't distribute those files legally. That is why you need to make your own from the 1.5/2.71 update. Just FYI.
does firmware 2.71 work on a ta 82? YES!!!!!!!
ever since I installed this I cant get usb mass storage to work even if I enable it in recovery menu. Each time I go back to the recovery menu it is disabled again. Is there something I have to do to save the settings. I Had the same problem with seb
x-flash will not work on it why ???
is there a x.flah out there for se-c??
i hate the m.f. standart gameboot :(
tony hawk project 8 still does not work :( full ou ripped version :(
SE-C install was super easy. don't see how soo many people have problems RTFM.
DARK-ALEX SUCKS!!
We're not worthy!
We're not worthy!
We're not worthy!
We're not worthy!
We're not worthy!
...Shwing!
Modules wont load or show up in recovery
I feel so stupid,upgradin g to stupid 2.82 while you guys get all this awesome stuff.I hope something like this is released for 2.82 soon or i'll get a new 2.71 PSP.
wats the difference is it from SE-B?
so from running modules we can use the mp3.module with out flashing it... and it WONT SEMIBRICK my psp))it semibricked my psp((
Hey guys, just updated to SEA-C, worked great, however i'm trying to get pimpstreamer working. I've got it running from the game150, it comes up, however it won't find the connection. The connection is working fine from the xmb, i can surf the web. Any ideas guys?
pimpsreamer is self in stalling if u have the latest version so just reinstall it!! will work ok.
" pimpsreamer is self in stalling if u have the latest version so just reinstall it!! will work ok."
I'm trying to use wpa-aes encryption as opposed to WEP, do you think pimpstreamer can't handle that? Because thats how i installed pimpstreamer ;)
I like cheese and also 1st post yeah in your face
oh thats messed up...thanks for correcting "helper" ..joe.
U ALMOST MAKE HIM BRICK HIS PSP.
ok will someone please tell me what modules are?!!!??!? i have a 1.50 psp so i dont really care too much but i guess they must be important to be added into a SE. Please tell me!
hck yeah me too
use devhook with 2.xx --> 2.00 activated
XD
I downgraded from SE-B" and it worked like a charm, now all my backed up games that didn't work on SE-B" run perfectly straight from XMB, good stuff.
The module loading works great aswell, and simple to do, loving it, great work DA, keep it up. Can't wait for USBHost to be implemented
Oh and also either FW2.80 or 3.00 to be DevHooked ;)
Peace.
i have enabled oc.prx in vsh and game and it dont work :/
help it keeps saying invalid 2.71 update when I try to make the dxar file. How can I fix this?
x-Flash doesn't work
nope, pimpstreamer will not work if you use WPA, only WEP is supported.....I think lots of people (including myself) wish it would support WPA.....check da pimpstreamer forum
I love my PSP 2.71SE-C.....great job again D_A....now somebody to release the 5 most important (or used) modules
It is rigth spelled in french lol !!
X-Flash 16b - runs on my 2.71SE-C
MP3 module - works fine
*usbfs plugin - works fine (ive not released it)*
PSP SDK compilers - works on windows XP / VISTA
You know....You can do A LOT with modules...U just need to know.!!
Thank Dark_Alex..! You pwn!!!!!!
Your like celebirty in the PSP WORLD!!!!
Much Much MUCH respect!!
well i did it i made a downgrader quite simple really all i did was take version 2.0 and everywere it said 2.0 on all of the files i replaces it with 5.73 (just a random number above 2.81) and updated after that i was able to downgrade using one of the first downgraders i got back to 1.5 i thought it was so simple it didnt need to be posted but anyone who wants can redo my work (warning it was very time consuming) and post it i dont care even take all of the credit for yourself i just dont have a qj account and dont want one
how can QJ allow racial comments on there website this site is getting worse and worse everyday
put the mod. in both vsh.txt and the game.txt....cuz game.txt is 4 in-game modules and vsh.txt is 4 XMB modules
Has anyone bricked their PSP when flashing this from 1.5?....or 2.71 SE-B?
so this doesn't work with TA-082 mother boards?
Brendan09 do u still need that file?
????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
sfdgsdfg
Thnx alot Dark_Alex you rule!!! :)
But anyways onto my point. I've installed this and now whenever I go to my music folder or open up the menu when looking at picture my psp freezes. I have atleast five prx's loaded the mp3vsh and game, svccapture, and cheatdevice for gta lcs and vcs. Anyone also getting this problem just wondering. Other then that great release.
y does it say to dl 1.50 and 2.71 firmwares? I didnt but installed SE-B and SE-C safely
I dont know if there is an easyer way but you can by downgradding to 1.5 then u[grading to 2.7 se(place current version here)
He makes better updates and I bet he does have better support.
lol
Thanks DA. You da man!
Do i have to put anything else in the RECOVERY folder in order to recover from SE C to 1.50? And a newby question: i imagine that game.txt is used to load modules for games right? vsh.txt is used to load modules for what?
wats wif this guy is he goth or emo but i love his work cmon 2.80 downgrader i believe in u man bring it home yeah!!
did you dl the oficial 2.71 EBOOT.PBP? dl again.
Hey guys still got my problem with usb mass storage, wont work even if i enable it in recovery menu, am I missing something obvious here
I dont understand why this is happening, i have exactly the same symptoms as you, let me know if you find out how to fix it!
GAME not' GAM folder..
uFlash works fine also.
Thanks for the tip!
Was using WinRar to rename.
You have to get a copy of the official 1.50 eboot, rename it to update.prb and put it in the ms:/PSP/GAME/RECOVERY folder
I take it you have to have a previous version of firmware to "update" to this? Idiot (me) updated to 3.01
To downgrade from any SE firmware (SE-A, SE-B, SE-B' etc.) all you need to do is place the 1.5 EBOOT (re-name it to 'UPDATE.PBP') into the 'RECOVERY' (which should be in your 'GAME' folder) and then hold R on PSP start up to enter recovery mode and just select 'Run program at /PSP/GAME/RECOVERY/EBOOT.PBP' and voila.
Hope this helps.
Thanks for another great release.
Could you please release without those f***ing crlf's in the source files next time? thanks!
The wonderful Chaos Zero brings another (Actually two more) easy and noob friendly installer(s) to us! This time for SE-C.
SE-C Installer - Basic
Includes:
Install SE-C with 2.71/2.80 Hybrid DevHook for SE
Install Just SE-C
Install Just 2.71/2.80 Hybrid DevHook for SE
Install Recovery folder
1.50 Users:
http://www.psp-haxors.com/wp-content/uploads/SE-C/271_SE-C-BASIC.exe
2.71 SE Users:
http://www.psp-haxors.com/wp-content/uploads/SE-C/271_SE-C-BASIC-UPGRADE.exe
Enjoy.
-SS
Just get em from http://psp-haxors.com/
Because wordwrap blows =/
High resolution made the site text larger, and cut off the filenames in my browser...the links work just fine...nvm this comment. -_-
I just upgraded to SE-C, and devhook works. I mounted my (legal) backup of Sonic Rivals (.ISO Format) using the sampler disc just fine. NesterJ 1.10 works as well. Looks like everything is good.
is there anyway for divx to be implemented into this firmware?
Ok, what does it mean when it freezes whenever i click on the Game folder on the XMB? Whenever I try to access the folder through the psp....it freezes. So I tried updating my psp by Network Update and went directly to the firmware installation. Then the error message showed up saying "DADADADA" . I've come across this message a lot now but not for the same reason. So can anyone help me out?
IM new have my system upgraded to 2.71 se c
put iso in iso folder go to load starts to load then get error loading msg
was wondering if i need somthing else some sort of loader etc
im doign somthign wrong I guess
I hit x to laod a game i get a psp load screen ..then kicks me back to menu ans msg the game could not be started
(8002032)
I installed this 2.71 se c firmware
and tried both 1.50 and 2.71 kernels
not sure what im missing as im new to this
thans TrackSol
I have installed the Custom Firmware and it plays ISO's
But when i go to load homebrew it freezes on the White PSP screen. Do i have to Change the GAME folder to something else or download the homebrew emulators again? I had a 1.50 from the start by the way.
Thanks
Hey, just wondering, will the latest X-Flash work with SE-C, or will we have to wait until Art updates it?
Is it possible with Se-c?
I just upgraded from 1.5- 2.71SE-c and so far awesome but how do i change the options on it like load isos and etc!
Question. If i have Regular Clean Non Homebrew running 2.71 firmware, can i just go straight to upgrading to this? or do i have to downgrade to 1.5, then upgrade to this? i need to know please!
Uhm, I might be gatting a little lazy, but How do you guys run ISOs off of this Special Edition Firmware?
Please give me a few examples on which programs/plugins to use.
[I'm not a total n00b, but I'm unsure as to what to do after updating. XD]
Thanks!
Alright, with a little messing around I realized I don't need any programs. - Just to put all the games I backed up into the ISO folder in the root of the memory stick. Sorry for taking up space and reading time guys [and girls]! XD
Help me....whenever i access the game folder through my psp...my psp freezes. when i try to autoupdate it w/ the sce update it said some kind of game error saying "DADADADADA". HELLLLLLLP ME
I had SE-B and I just upgraded to SE-C but I have no idea what any of the new features do. I guess I just did i to have the newest thing and try to figure this new crap out hah. Anyways it works fine and I just downgraded back to 1.5 FW using the recovery option than used a easy installer to install 2.71 SE-C with DevHook. If anyone is interested it is really easy and you can get the installer here.
http://www.psp-hacks.com/file/924
On the root of your PSP?
so once ur on 1.5 firmware, just get setup and run this program and when everything is complete, you will be on 2.71 SE-C with devhook? nothing else is required?
Hi, I'm a noob with the custom firmware...i put this one onto my fresh 1.50. I created a folder called GAME150 and some of my homebrew shows up but some doesnt! Also, the corrupt icons dont go away after i've told them to in the recovery menu. Anyone who can offer help here i would appreciate it...i'm just such a noob with this program
how do i run burnout legends iso with no umd... has this been fixed?
how do i run burnout legends iso with no umd... has this been fixed?
80000002
x';",)`
80000002
Great work again..... Sir Alex !!!!
when and are you going to bring out 3.02 ??...
so much easyer than dev hook...
( girl frend safe )
Ha ha.... keep up the good work :)
Okay, i've been reading every where, need a
I have a TA-082 motherboard with firmware verison 2.82, I know trying to install this will brick my Psp.
If i have these two options will both result in my having 2.71 se-c?
1) trade my 2.81 TA-082 PSP for a 2.71 NON-Ta-082 Psp and instal se-c without downgrading
2)trade my 2.81 TA-082 PSP for a 1.5 firmware Psp
can i do either one of these? or just number 2?
Any help greatly appreciated
THX
Dark Alex ur daaa bestttttttttttt ttttttttttttttt ttttttt
I checked all the comment here but couldn't find anyone mentioning about upgrade from SE-A to SE-C? Can someone help me up on that and tell me how to do it step by step? Thanks.
how to flash back to 1.5 using recovery flasher???coz i was in previous version of 2.71se B.....can i know more in detail how to recover n upgrade to 2.71 se C....??/ i love u all
izzit the same between SE-B n SE-B"????....i still can u the SE-B recovery flasher????
can get psp radio to work any tip?
Ok ... I might be a dumbass I might even be a bit slow ... but here goes the question:
Can you run ISO/CSO of games like Star Wars Lethal Alliance on 2.71 SE-C with the No UMD option selected? I keep getting an error. I also get errors with other games with the same configuration. With those games the system starts like it is going to play the game then just black screens until it powers off. I have done some minor invistigation and found that all the games it has an issue with are ones that within the ISO the game version says 2.8x or higher. Please Help. Someone ...
Thanks In Advance (TIA)
Juxtyce